Fluid Components International ST100 Series Foundation Fieldbus - Manual (Page 7)

ST100 Series Foundation Fieldbus
Fluid Components International LLC 5
Operation
Functional Description
The ST100 is a Flowmeter with three flow classifications, volumetric flow, mass flow, and velocity flow. In addition, the ST100 family of instruments
offers process temperature and process pressure.
The Foundation Fieldbus functionality is organized into two modes; an Instrument Process Data mode, and an Instrument Setup mode. In order to sup-
port these two modes, two transducer blocks were design, one for process data and one for basic setup data.
The ST100 can support up to 2 flow sensors, the output is presented as an average of the two flow sensors. The ST100 has the capability of viewing
the output of each sensor head.
Function Transducer Blocks
The ST100 has 8(7?) FOUNDATION Fieldbus blocks to present its process data and setup features; these are a Resource Block, a Process data Trans-
ducer block, a Service Transducer Block, a Flow Analog Input Block, a Temperature Analog Input, Totalizer Analog Input, Pressure Analog Input Block.
Data Types Definitions
DS-64 Data Type