Fluid Components International ST100 Series Foundation Fieldbus - Manual (Page 26)

ST100 Series Foundation Fieldbus
24 Fluid Components International LLC
Configuring the Totalizer AI Block
The configuration process is similar to the Flow AI block except for the parameter setting below.
• Set the CHANNEL parameter to “Totalizer average”.
• Set the UNITS_INDEX parameter to the Totalizer units that match the Flow units. If the flow units are ‘L/s’ that the Totalizer units must be ‘L’.
Configuring the Pressure AI Block
The configuration process is similar to the Flow AI block except for the parameter setting below.
• Set the CHANNEL parameter to “Pressure average”.
• Set the UNITS_INDEX parameter to the desired pressure units i.e. “PSIG”.