1 using the keypad, 2 controller display features – Hach-Lange SC 60 User Manual
Page 31
27
Section 4
Operation
4.1 Using the Keypad
The front of the controller is shown in
Figure 22
. The keypad
consists of the eight keys as described in
Table 7:
.
Table 7: Controller Key Functions/Features
4.2 Controller Display Features
When a sensor is connected and the controller is in measurement
mode, the controller automatically identifies the connected sensors
and displays associated measurements.
Figure 22 Front of the Controller
1
Instrument display
4
RIGHT, LEFT, UP, and DOWN keys
2
BACK key
5
HOME key
3
MENU key
6
ENTER key
Number
Key
Function
2
Moves back one level in the menu structure.
3
Moves to the main menu from other menus. This key is not active in menus where a selection or
other input must be made.
4
Navigates through the menus, changes settings, and increments and decrements digits.
6
Moves to the Main Measurement screen from any other screen. This key is not active in menus
where a selection or other input must be made.
7
Accepts an input value, updates, or accepts displayed menu options.
sc60
1
2
6
3
7
4