KT&C KVR-1601S - Manual (Page 112)

112
7.4.2 Local Setting
 Please Click ‘Setup’ button on the top of the Toolbar and the following screen will display.
 There are three types of setup such as Device Manager, Display Setup and Password Change.
7.4.2.1 Display Manager
 Please Click ‘Device manager’ and the following screen will display.
 Users will see the existing DVRs on the list, if there is any added DVR previously.
 Please Click ‘Add’ to add new device.
 Please type all the necessary information in the empty space and Click ‘OK’ to submit the device information
 Device Info
- Device Name: input the DVR site name which will be displayed on the Server list. Please note that this name has nothing
to do with the ID registered in DVR. Users may create the name that is fairly easy to distinguish.
- Description: type brief description of the site
- IP Address: input IP address or Domain Name of DVR (check with SETUP>DEVICES>Network in DVR).
- Command Port: input Administrator’s number among port numbers set in DVR (check with SETUP>DEVICES>Network
in DVR). (Default, 5920)
- Stream Port: INPUT Video/Audio number among port numbers set in DVR (check with SETUP>DEVICES>Network in
DVR). (Default, 5921)
- User Name: Type authorized ID of the DVR. Default ID is admin.
- Password: Type corresponding password of the ID. Default Password is 1111.
- Confirm Password: Retype the password to confirm.