KT&C KVR-1601S - Manual (Page 37)

37
4.2 SYSTEM
4.2.1 Status
 Entering Setup Menu following screen will display.
 System Status show information of the DVR like followings
- DVR name
- DVR ID
- MAC Address
- Firmware
- Date
- Language
- IP Address
- UPnP
- Video Signal
- HDD Usage
- Camera / Audio Connection
- HDD information
- Record Start & End time
NOTE
Values cannot be changed at ‘Status’. Please see ‘General’ to change the value.
4.2.2 General
 Please Click ( ) SYSTEM>General and the following screen will display.