KT&C KVR-1601S - Manual (Page 45)

45
Position (OSD)
 Position (OSD) menu allows a user to adjust the position of Channel OSD on the monitor. Use it when some letters are
dropped/invisible/blocked on the monitor.
 Adjust Horizontal to change margin between both ends of the monitor on horizontal side and OSD. Margin range is between 0
and 50, with a larger number representing greater margin.
- Use ▲, ▼ to adjust position of OSD
 Adjust Vertical to change margin between both ends of the monitor on vertical side and OSD. Margin range is between 0 and
50, with a larger number representing greater margin.
- Use ▲, ▼ to adjust position of OSD
 Please Click ( ) Menu Icon and the following screen will display.
 The Menu Icon menu allows a user to customize the Left and Right side popup menu which is displayed on the screen by
moving a mouse pointer on each side.
 Left side popup menu is for ‘Display’ options and Right side popup is for ‘System’ options. Click ( ) ‘All’ selects/deselects all
sub options.
 Click ( ) to restore default value.
 Please Click ( ) Sequence and the following screen will display.
 The Sequence menu allows a user to adjust channel sequencing interval of Main monitor.
- X1 Seq: Adjust interval for ‘Full screen sequencing’.
- X4 Seq: Adjust interval for ‘4 split screen sequencing’.
- X8 Seq: Adjust interval for ‘8 split screen sequencing’.
- X9 Seq: Adjust interval for ‘9 split screen sequencing’.
- X10 Seq: Adjust interval for ’10 split screen sequencing’.
 Check  check box next to the camera that wish to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
Menu Icon
Sequence