KT&C KVR-1601S - Manual (Page 159)

159
11. KEYBOARD CONTROLLER (CP1300)
11.1 Connection
 A user may connect cameras and Keyboard to a DVR.
 Please see below for connection examples. RS485 ports are used for connections.
11.1.1 Configuration Diagram
 Example
 Please make sure to connect “Tx to Rx“ or “Rx to Tx” with same polarity. (+ to +) and (- to -).
11.1.2 USB Connection
 In order to use Touch Pad on CP1300, a user should connect CP1300 and DVR with provided USB cable.
 DVR will automatically recognize the Touch Pad.
11.2 Keyboard Setup in DVR
 Enter “Setup>SYSTEM>General>Setup” and define the ID of DVR.
 When a user connects more than two DVRs then each DVR has to have a different ID.
 Then move to “Setup>Device>Camera” and select CP1300.
 Then, choose PTZ protocol and Camera ID. (For detailed information on setting PTZ camera, please refer to DVR manual)