KT&C KVR-1601S - Manual (Page 116)

116
NOTE
The selected channel is outlined in blue
7.5.3 Health Check
 Please choose one of the registered sites in Server list and the right Click on the mouse button will pop up the menu with
‘Health Check’.
 Please choose ‘Health check’ function when users want to check the status of the DVRs.
 Now users can choose either Health Check or Monitoring to see the status of the DVR at the bottom of the right corner.
 Health check shows the status of how many cameras are activated, how many HDDs are available, and how many channels
are recorded.
 Monitoring shows the status of the number of motion detection and how many alarm in and alarm out are activated.
Number Description
1 DVR name
2 Start and finish recorded date and time
3 The version of the firmware
4 The number of Connected network(ex. CMS, Mobile CMS, etc.) to the DVR
7.5.4 PTZ Control
 Under the server list, PTZ control can be found. This is for the control of Pan/Tilt/Zoom cameras.
 Buttons on the screen have the following functions.
- Up/Down/Left/Right direction buttons
①
②
③ ④