KT&C KVR-1601S - Manual (Page 163)

163
11.5 Operation
11.5.1 DVR/SPD Mode Conversion
 Press “System ID” + “ ” to enter DVR control Mode.
 Press “Speed Dome Camera ID” + “ ” to enter PTZ camera control Mode.
Example
 If a user wishes to connect to SYSTEM ID 3 DVR then press Num Pad “ “+ “ ”.
 If a user wishes to connect to Speed Dome camera ID 3 then press Num Pad “ “ + “ ”.
11.5.2 DVR Control Mode
11.5.2.1 Connection
 If the DVR Control Mode is selected followings will display on Keyboard LCD and Live OSD as “KBD: #” on the right-bottom
corner.
 Then, a user should be able to operate the DVR functions by CP1300.
11.5.2.2 Buttons
 In DVR control mode, all buttons are operated according to texts written on each button. The functions are same as Front
buttons of DVR as follows:
- : Change display mode on Live and Playback in sequence of 1CH>4CH>9CH>16CH>1CH.
- : Activates and the AUDIO function and change Audio channel
- : Turn on/off Sequence function. Only supports 1CH, 4CH, 9Ch display mode
- : Pop up System Log
- : Active Emergency recording.
- : Pop up Search Menu in Live or switches to Live in Playback mode.
- : Pop up Archive window.
- : Change the channel of a monitor connected to the Spot output.
- : Freeze a current image in Live mode ONLY.
- : Pop up Setup window.
- : Enter PTZ control mode and able to use PTZ function of DVR.