KT&C KVR-1601S - Manual (Page 40)

40
 Please Click ( ) Select box next to Check NTP Server in Interval to sync the time regularly by selected interval.
 NTP Server: Click ( ) or address in NTP Server box and the virtual keyboard will display. Input IP address of NTP server
 Check Interval: Set clock-update-interval from NTP Server. A user can adjust time every 1 to 24 hours.
 Please choose ‘OK’ to confirm the NTP setup, choose ‘Cancel’ to cancel.
NOTE
Check the box next to to connect Time Zone setting with NTP Server. A user should set the Time zone correctly to
operate the NTP function properly.
NOTE
Currently used NTP is administered by pool.ntp.org. However, users are allowed to use IP address of any NTP site. (If they have their own,
otherwise leave the default Serve name.)
Time Zone
 Please Click ( ) Drop-down list of Time Zone to select correct time zone.
NTP Time
 Display NTP Server time, if Internet is connected to Time Server. If not displaying, please Click ( ) .
 When NTP Time’s Clock is displayed, please Click ( ) to synchronize NTP Server’s clock with DVR clock.
NOTE
The displayed Server Time could be 30 minutes or 1 hour off from actual local time when the region is on Daylight Saving
Time period. Just disregard it and sync the time. When you proceed to ‘EXIT’. The very correct time should have been
applied and displayed on DVR’s screen.
DST
 Please Click ( ) Select box of DST to use Daylight Saving Time or not.
 If DST is (if different DST rule is) observed, please Click ( ) and the following screen will display.
 Adjust the dates of Start and End for DST
 Please follow the procedure below for date adjustment. (Start & End)
① Use arrow buttons in the Month Calendar to select date.
- : Move to next ‘Month’
- : Move to previous ‘Month’
② Click (  ) a date. The date will be displayed in blue color
 Please follow the procedure below for time adjustment. (Start & End)
① Adjust the number by Clicking (  ) ▲, ▼ buttons on the right-hand side.
 Please choose ‘OK’ to confirm the adjusted date and time, choose ‘Cancel’ to cancel.