KT&C KVR-1601S - Manual (Page 187)

187
13.6.4 Unpacking
 This equipment is an electronic appliance, so it should be handled with special care.
13.6.5 Service
 If there is any problem in the product, please contact a supplier or a distributor.
13.6.6 System Dimension Diagram
13.6.7 Connector Wiring
13.6.7.1 4 In/ 4 out HD-SDI Connections
 Connect 4 HD-SDI devices (e.g. Camera) to each of 4 ‘HD-SDI IN’ of HD-SDI repeater.
 Connect 4 HD-SDI devices (e.g. DVR) to each of 4 ‘HD-SDI OUT’ of HD-SDI repeater.
13.6.7.2 Power Supply Connections
 Plug the power supply adapter (DC 12V, 3.33A) which is included in this product to ’DC12V’ connector and plug another side
to power source and Input voltage is a free volt (100 VAC ~ 240 VAC).
13.6.8 Cable
 75 ohm coaxial cable
NOTE
The cable above is not included in the package.