KT&C KVR-1601S - Manual (Page 113)

113
 If users want to scan the devices instead of typing the information manually, please Click ‘Scan device’. It will automatically
detect DVR units currently connected to local networks.
 Click “Scan Device”, then following ‘Dialog’ will pop up.
 Including IP address, the information of connected DVRs in the network will be listed.
 Select the one and Click ‘OK’. Then, the following window will pop up.
 Please fill out all the necessary information including Device name, Description (not mandatory), User Name and Password
and confirm password. Please note that the User Name and Password have to be same as the DVR setting.
 When users want to edit the existing device information, please choose the device and Click ‘Edit.
 When users want to delete the existing device information on the list, please select the device and Click ‘Remove’.
 If users click the ‘Remove’ button, it will show the message below.
 Please Click the ‘OK’ button to remove the connected device
7.4.2.2 Display Setup
 Please Click ‘Display Setup’ and the following screen will display.
 Users can adjust and set the peripheral values of the display window.
- Default Division: Users can select the number of division of display channels when the program initially starts the screen.
(1, 4, 9, 16, 25, 36 or 64).
- Users can choose either English or Korean in language setup.
NOTE
This option will be applied after program restarts.