Asus TS300-E5 - Manual (Page 116)

5-24 Chapter 5: BIOS setup
5.5 Power Configuration
The Power Configuration menu items allow you to change the settings for the ACPI
and Advanced Power Management (APM) features. Select an item then press
<Enter> to display the configuration options.
ACPI 2.0 Support [Disabled]
Allows you to enable or disable the Advanced Configuration and Power Interface
(ACPI) 2.0 Support. Configuration options: [Disabled] [Enabled]
ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power Interface
(ACPI) support in the Advanced Programmable Interrupt Controller (APIC). When
set to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list.
Configuration options: [Disabled] [Enabled]
ACPI 2.0 Support [Disabled]
ACPI APIC Support [Enabled]
APM Configuration
Hardware Monitor
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Add additional
tables as per ACPI
2.0 specifications.
BIOS SETUP UTILITY
Main Advanced Power Boot Exit
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.
BIOS SETUP UTILITY
Power
<Enter> to select
whether or not to
restart the system
after AC power loss.
APM Configuration
Restore on AC Power Loss [Last State]
Resume On Ring [Disabled]
Resume On PME# [Disabled]
Resume On RTC Alarm [Disabled]
5.5.1 APM Configuration