Asus TS300-E5 User Manual

Page 132

Advertising

6-6

Chapter 6: RAID configuration

4. Select all the drives required for the RAID set, then press <Enter>.

The configurable array appears on screen.

3. The ARRAY SELECTION MENU displays the available drives connected to

the SATA ports. Select the drives you want to include in the RAID set, then

press <SpaceBar>. When selected, the drive indicator changes from READY

to ONLIN A[X]-[Y], where X is the array number, and Y is the drive number.

The information of the selected hard disk drive displays at the bottom of the

screen.

LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007

SPACE-Sel,ENTER-EndArray,F10-Configure,F2-Drive Info,F3-Logical Drives,F4-HSP

Management Menu

Configure

Initialize

Objects

Rebuild

Check Consistency

Port # 0 DISK 77247MB HDS728080PLA380 PF20A60A

Easy Configuration - ARRAY SELECTION MENU

PORT #

0
1

Ready
Ready