Using the objects command, When initialization is completed, press <esc, 20 chapter 6: raid configuration – Asus TS300-E5 User Manual
Page 146
6-20
Chapter 6: RAID configuration
5. When initialization is completed, press <Esc>.
Using the Objects command
To initialize the logical drives using the Objects command:
1. From the Management Menu, highlight Objects, then press <Enter>.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
SPACE-(De)Select, F10-Initialize
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Logical Drive(s) Configured
LD RAID Size #Stripes StripSz Status
0 10 154494MB 4 64 KB ONLINE
Logical Drives
Loical Drive 0
Initialization Of LD Is In Process
LD 0 Initialization Complete. Press Esc..
¦ 100 % Completed
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Configure Objects Like Adapter Parameters