Asus TS300-E5 - Manual (Page 138)

6-12 Chapter 6: RAID configuration
4. Select all the drives required for the RAID 10 set, then press <Enter>. The
configurable array appears on screen.
5. Press <F10>, select the configurable array, then press <SpaceBar>.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
SPACE-Sel,ENTER-EndArray,F10-Configure,F2-Drive Info,F3-Logical Drives,F4-HSP
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Port # 1 DISK 77247MB HDS728080PLA380 PF20A60A
Easy Configuration - ARRAY SELECTION MENU
PORT #
0
1
2
3 ONLIN A00-00
ONLIN A00-01
ONLIN A00-02
ONLIN A00-03
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Cursor Keys, SPACE-(De)Select F2-ChIdInfo F3-SlotInfo F10-Configure Esc-Quit
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Easy Configuration - ARRAY SELECTION MENU
Select Configurable Array(s)
A-0
SPAN-1