Asus TS300-E5 - Manual (Page 64)

Chapter 2: Hardware setup 2-42
To remove the power supply unit (PSU):
1. Remove the chassis cover. Refer to section 2.1.1 Removing the side cover.
2. Remove the front panel assembly. Refer to section 2.5.1 Removing the
front panel assembly.
3. Lay the chassis on a flat, stable surface.
4. Locate the four screws on the rear
panel. Remove the screws and set
them aside.
5. Locate and remove the screws
that secure the PSU bracket to the
chassis.
6. Slide the bracket in the direction of
the arrow and remove it from the
chassis.