Asus TS300-E5 - Manual (Page 139)

ASUS TS300-E5 6-13
Press <F10> again, the logical drive information appears including a Logical
Drive menu that allows you to change the logical drive parameters.
6. Select RAID from the Logical Drive menu, then press <Enter>.
7. Select RAID 10 from the menu, then press <Enter>.
You need at least four identical hard disk drives when creating a RAID 10 set.
8. Select DWC from the Logical Drive menu, then press <Enter>.
9. Select On to enable the Disk Write Cache setting, then press <Enter>.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Logical Drive(s) Configured
LD RAID Size #Stripes StripSz Status
0 0 308988MB 4 64 KB ONLINE
Logical Drive 0
RAID = 0
Size = 308988MB
DWC = Off
RA = On
Accept
SPAN = NO
Choose RAID Level For This VD
RAID = 0
RAID 5
RAID 10
RAID Level
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
DNLIN A00-00
DNLIN A00-01
ONLIN A00-03
Logical Drive(s) Configured
LD RAID Size #Stripes StripSz Status
0 10 308988MB 4 64 KB ONLINE
Logical Drive 0
RAID = 1
Size = 154494MB
DWC = Off
RA = On
Accept
SPAN = NO
Disk Write Cache Setting Of VD
Change DWC
Off
On