Asus TS300-E5 - Manual (Page 137)

ASUS TS300-E5 6-11
6.2.2 Creating a RAID 10 set
You can create a RAID 10 set using four identical hard disk drives.
To create a RAID 10 set using the Easy Configuration option:
1. From the utility main menu, highlight Configure, then press <Enter>.
2. Use the arrow keys to select Easy Configuration, then press <Enter>.
3. The ARRAY SELECTION MENU displays the available drives connected to
the SATA ports. Select the drive(s) you want to include in the RAID set, then
press <SpaceBar>. When selected, the drive indicator changes from READY
to ONLIN A[X]-[Y], where X is the array number, and Y is the drive number.
The information of the selected hard disk drive displays at the bottom of the
screen.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Defines Physical Arrays. An Array Will Automatically Become A VD
Configuration Menu
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
SPACE-Sel,ENTER-EndArray,F10-Configure,F2-Drive Info,F3-Logical Drives,F4-HSP
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Port # 0 DISK 77247MB HDS728080PLA380 PF20A60A
Easy Configuration - ARRAY SELECTION MENU
PORT #
0
1
2
3 Ready
Ready
Ready
Ready