Asus TS300-E5 - Manual (Page 202)

7-16 Chapter 7: Driver installation
To an existing Windows ® Server
To install the RAID controller driver on an existing Windows ® Server:
After installing the LSI 1064E RAID Controller card and rebooting your
system, Windows Server setup will show a “Found New Hardware” dialog
box. Under Windows, “RAID Controller” will be displayed.
1. Insert the LSI driver diskette into the A:\ drive.
2. Choose Install the software automatically and press the Enter key.
3. Choose LSI 1064E (tm) Controller from the list that appears on screen,
and then press the Enter key.
4. If using a driver that has not been digitally signed by Microsoft, you
will be asked if you want to continue the installation. Click Continue
anyway.
5. When the New Hardware Wizard has finished installing the LSI driver,
click Finish.
Confirming Driver Installation
1. Right-click the My Computer icon and choose Manage from the popup
menu.
2. From the left panel, choose Device Manager.
3. Click the “+” in front of SCSI and RAID controllers. “LSI 1064E (tm)
Controller” and “LSI Raid Console” should appear.