CTI Products RCD Advanced Client-Server - Manual (Page 100)

MCNConfig Program: Master-Sub Comparator Configuration
100 68-11824-210
5. Customizing Display Tables
In the “Display Table” window, several types of devices have been predefined, including Comparator,
Generator, Door, and others. Each device type has its own tab across the top of this window. The
Master-Sub Comparator Option adds the following Display Tables:
•
Master Comparator
•
Sub Comparator
•
Sub Comparator Enhanced
If these display tables suit your application, you can skip this section. If you need to modify them, read
on.
Sub Comparator Display Table
The Sub Comparator display table States tab is shown below:
This Sub Comparator States table has several basic differences from the basic Comparator display
table:
•
The Steer bit is a Don't Care (we're not using Transmitter Steering in this system)
•
An additional Master (Master Vote) bit has been added (leftmost bit).
•
The Vote state requires the Master bit (Master Vote) bit to be set (State 6)
•
If the Rx bit is set and the Master (Master Vote) bit is not set, the display will show "Rx", even
if the Vote bit (Sub Comparator Vote) is set (State 5)
The Master (Master Vote) bit is inherited from the Master comparator. It is only set when the Sub
Comparator is voted in the Master Comparator.