CTI Products RCD Advanced Client-Server - Manual (Page 144)

MCN Server Program
144 68-11824-210
Email Setup Verification
A “Test” button is provided in the “Email Setup” window to verify if all email parameters are set
correctly. Click on this
Test button to display the “Email Test” window shown below:
To send a test email, select an Email Group from the drop-down list, then click Send . If successful, the
following “Test Passed” window will be displayed.
Another way to verify that the MCN Server program has successfully logged into the email server in the
window above (and an email has been submitted for transmission), is to notice the Status Bar at the
bottom of the MCN Server display window. If successful, the "Email Sent" status message will be
displayed as shown below.
This email message will be delayed until the "Holdoff Time" specified in the "Email Group" properties
window has expired. Navigate to this parameter in the MCNConfig program by right-clicking on a tab of
the "Email Groups" Resource Window, then select
Email Group Properties . See Email Holdoff
Time on page 59 for more information. This message will be visible for approximately 15 seconds.