CTI Products RCD Advanced Client-Server - Manual (Page 123)

MCNConfig Program: Triggered Output Actions Option
123 68-11824-210
Triggers
Triggers are set up in the State tab of the Input Display Table for the inputs that will be generating the
trigger events. You will normally just be adding triggers to existing input Display Tables. For each
Input Display Table you'll need to:
•
Select an Output Device Type to associate the Input Display Table with and
•
Select an Output Action to trigger for various input states.
Setting up Triggers
1. Start in the Display Table window.
Select the States tab on the bottom tabs.
Select the desired Input Display Table on
the top tabs.
Double click on
Triggers Output Action Display Table
cell.
2. The Output Selection window will open.
The Output Device Types you have configured with
Actions will show up in the list of Display Tables.
Select the appropriate Display Table for your
Output Device type.
Hit OK
3. The selected Output Device Type
will be displayed in the Triggers
Output Action Display Table cell.
Select a Trigger State and double-
click in the far right column