CTI Products RCD Advanced Client-Server - Manual (Page 130)

MCNConfig Program: Importing a System from MCNRCD for DOS
130 68-11824-210
Select the first Group File to load and click the Add button.
Or, Double Click on an GCF File on the left side to add.
Repeat until you have added all the Group files that you want to import.
Click the Import button.
The program will build a Hardware Window and a Receivers Window.
Saving Imported Systems
The import function will convert any special Display Table
(Custom Status) information and colors from your old DOS system.
The DOS program used a blue background, whereas the Windows
program uses a White background.
The MCNConfig program gives you the ability to use either the imported Display Table information or
the Default Windows Display Table information.
If you DO NOT nave custom status table data in the MCNRCD.CFG file:
You will probably want to use the new Default Windows Display Table.
1. Save the system now (before you make a Display Window).
2. Close the system.
3. Re-open the system. The program will use the default Display Table.
4. Build your Display Windows.
5. Re-save the system.
If you DO HAVE custom status table data in the MCNRCD.CFG file:
You will probably want to use the converted Display Table.
1. Build a Display Window before you save the system
2. The system will use the converted Custom Status information.
3. Save the System
4. If you want to change the status colors (this can be done later),
- Save the system
- View the Display Table Window.
- Edit the appropriate Display Table entries.
Save Now
or
Save Later?