CTI Products RCD Advanced Client-Server User Manual
Page 122
Advertising
MCNConfig Program: Triggered Output Actions Option
122
68-11824-210
8.
Repeat the above to add any additional actions
required.
Normally when using Triggered Outputs, you
would only Set (to 1) outputs when an input event
occurs. You'll normally reset the alarm bit
manually.
You can, however, set up both a Set and Reset
action that can be used with input events as shown
to the right.
To reset a bit, select Set
and a bit value of 0.
This completes the definition of a Triggered Output Type.
Advertising
This manual is related to the following products: