CTI Products RCD Advanced Client-Server - Manual (Page 137)

MCN Server Program
137 68-11824-210
Selecting an Ethernet NIC to talk to the HIB-IP units
Next, the program needs to know which Ethernet NIC card will be used to talk to the HIB-IP units. The
Select IP Address window appears and asks you to select an IP address (associated with a NIC card in
your PC) that you will use to talk to the HIB-IP units.
Select an IP address and NIC card using the drop-down list. There will be an entry for each combination
of IP addresses and NIC cards in your PC. If you have only one NIC card, you will probably have only
one entry.
The program will ask for this information even if you don't have any HIB-IP units in your system.
Humor the program and select an IP address and NIC card anyway.
Selecting an Ethernet NIC to talk to the MCN Client PCs
The program then needs to know which Ethernet NIC card will be used to talk to the MCN Client PCs.
The Select IP Address window appears and asks you to select an IP address (associated with a NIC card
in your PC) that you will use to talk to the Client PCs.
Again, select an IP address and NIC card from the drop-down list.