PROLiNK PIC1007WP User Manual - Manual (Page 12)

1.6. Video Display
This display page allows you to view the video display and control the pan/tilt movement of the IP Camera. For
the first time use of this display on a computer, an ActiveX component will be automatically downloaded into
the browser. This could take some time, depends on the internet speed. The component is downloaded from a
public domain, so that the computer must be connected to the Internet.
If you want to modify the video display screen size, please refer to section 1.10 for more details.
Figure 3-4: Video display page
Pan/tilt control:
1. Control by LiveView – this is to enable/disable the pan/tilt control function by LiveView software.
2. Speed – this is to control the pan/tilt moving step distance for each pan or tilt movement, fast means
larger step movement.
3. Pan – click this button will let the IP Camera do one horizontal pan scan movement.
4. Tilt – click this button will let the IP Camera do one vertical tilt scan movement.
5. Patrol control – you can set up to 5 patrol points that will let the IP Camera to patrol through these patrol
points. To set the patrol point, first move the IP Camera to the desired view position by clicking the
different arrow buttons, and then press the “position” button of the specific patrol point. The (x,y) axis
values will be updated accordingly. You can click the (x,y) axis of the patrol point to direct the view to this
specific patrol point directly. After the patrol points are set, you can click the “Patrol” button to start the
patrol through these points one time.
6. Stay xx secs – this is the time for each patrol point to stay before going to next patrol point.
7. Patrol – click this button to start the patrol movement of the IP Camera.
8. Stop – this will stop the patrol movement.
Control by LiveView
EN 12