PROLiNK PIC1007WP User Manual - Manual (Page 22)

5. The “NAS access account” and “NAS access password” are the username and password to login into the
specified “Shared folder name” of the NAS device.
6. NAS Scan – use this to scan for some specific NAS devices in the same network. Not all the NAS devices
are supported for this scan function.
7. NAS Info – display the NAS storage capacity and available disk space.
8. Configure NAS (web) – click this to connect to the web configuration page of the NAS device. Need to key
in the login username/password of the NAS device.
9. Access NAS files – on the Microsoft Windows platform, click this to access the files on the NAS devices.
In the Microsoft Windows environment, you can access to the NAS device by keying the URL address \\”NAS
name”\”shared folder name” or \\”NAS IP address”\”shared folder name” in the windows Internet Explorer,
and then key in the “NAS access account” and “NAS access password” to the prompted login window. The
video files are recorded under the subfolder IPCamRecordFiles/Recording/ID-ID, where ID is the ID of this IP
Camera. All the recorded files are with the name of hhmmss.crf format, where hh is the hour, mm is the
minute, ss is the second of the starting time of the recording video. The files are segmented every five
minutes. Users can use the free bundled LivePlay software to play back the video files.
Figure 3-17: NAS Storage Settings page
EN 22