PROLiNK PIC1007WP User Manual User Manual
Page 7
Figure 2-2: Connect Ethernet cable to a switch/router.
1.3.2. Step 2 : Install the LiveView Software on your notebook/PC
Figure 2-3 : Setup CD
1.3. Quick Installation and Usage
Setting up the IP Camera is as Easy as 1-2-3.
Step 1 Connect the IP Camera to your home/office network.
Step 2 Install the LiveView Software on your notebook/PC.
Step 3 Key in the Password of the IP Camera in the LiveView, and you are done.
1.3.1. Step 1 : Connect the IP CAM to your home/office network
LAN
WAN
NAT/Router
PIC1007WP
Power Adapter
Ethernet Cable
Internet
(Wired)
Please plug the power adapter to the IP Camera , and turn the power socket switch on. Connect one end of
the Ethernet cable to the IP Camera and another end to the home or office network. Usually, this Ethernet
cable is plugged into a home NAT/router device or an Ethernet switch if in the office (as shown in Figure 2-2).
Since the default settings of the IP Camera use DHCP function and very often there is a DHCP server on most
of the home/office network, the IP Camera should be connected to the Internet immediately. The Internet
status LED should be red and constant to indicate it has a good connection status. If the LED is blinking, please
refer to section 1.7~1.9 to try other network settings.
Please insert the installation CD into the CD-ROM drive (for
Windows OS platform only). The Setup CD will autorun and you
should see the Main Menu immediately. Select Management
Software and follow the instructions to complete the setup. When
completed, LiveView and LivePlay icons will be created in the
desktop area.
Notice
1. Before installing LiveView on your notebook or PC, please make
sure you have correctly installed the IP Camera. It is highly
recommended to close other Windows applications to prevent any
possible conflict in the installation process.
2. For LiveView Mac version, kindly download the software from our
website at www.prolink2u.com. (Mac version is still in beta and some
features may not function as intended.)
EN 7
© Cop
yright 2013 PROLiNK All Rights Reserv
ed.
PIC1007WP
Wireless IP
Camera
CD Contents:
•
Management Software
•
Quick Installation
Guide
Version 1.0 (Apr’13)