PROLiNK PIC1007WP User Manual - Manual (Page 5)

1. Introduction
The PROLiNK® PIC1007WP MegaPixel Dual Lens Wireless IP Camera (will be referred to as “IP Camera for the entire
document) is designed with the ” user friendly“ idea in mind. You can install the IP Camera easily on your home
network and then access the IP Camera anywhere in the world from your mobile or pc with only a camera id and
password. There are no user registration, no fixed IP address, no complicated DDNS setup or changing the router’s
settings. It is truly a Plug & Play experience.
At the heart of this IP Camera, lies not one but two Lens and two Sensors uniquely designed for day and night
operation. One lens is specially tuned for day and the other for night, and this eliminates the need of a mechanical
controlled IR-cut filter which is traditionally used by night vision camera. With this unique design , you no longer face
mechanical failyres that affects night vision and video quality. It is also coupled with two high power IR LED with an
effective range of 10m to provide a clearer visual even in total darkness.
Next, the IP Camera provides the best video quality in its class and excellent performance. Using the latest H.264
video compression technology, the IP camera offers High Definition 1280x800 resolution at 30 fps frame rate. In
addition to the high performance, the IP Camera comes with built-in microphone and speaker that enables remote
users to not only view but also allow 2-way communication for additional monitoring options.
For easy and flexible setup, the IP Camera provides both wireless IEEE 802.11 b/g/n and wired Ethernet network
interfaces. It supports the WEP and WPA2 (Wi-Fi Protected Access) security modes to provide the best security for
wireless networks. It also comes with built-in with WPS (WiFi Protected Setup) button for wuick and hassle free
wireless connection setup.
Micro-SD card slot and NAS storage support is built right into the IP Camera to provide recording and playback with
out the need of a dedicated NVR as with conventional cctv system Scheduling function is also available with
advanced trigger detection to make sure all important events are recorded timely into Micro-SD card or NAS storage.
For intrusion prevention, the IP Camera provides advanced PIR/Motion/Sound/Temperature detection function. You
can easily setup these functions and receive alerts via Push notification or Email/FTP with the snapshot images when
events alerts are detected.
The IP Camera is ideal for securing small businesses, home offices and residences over a local area network and/or
the Internet.
1.1. The Differences
TRUE Plug & Play. It’s very easy to see the video of the IP Camera from anywhere in the world, you only need to key
in the ID/Password of the IP Camera, and you DO NOT need to remember the IP address or domain name or DDNS
name or port number, And you do not need to modify the settings (like port mapping, fixed IP, DDNS, virtual server)
of the NAT/router devices, just Plug&Play to use it.
EN 5