PROLiNK PIC1007WP User Manual User Manual
Page 28
Figure 3-22: Firmware upgrade settings page
Figure 3-23: Firmware upgrade status page
1.22. Upgrade
If there is new firmware available for this IP Camera, you can upgrade the firmware from this page. Please ask for
the correct information about FTP server, username/password account and firmware filename from your
supplier, and then do this upgrade. When you start the upgrade process, the page will show the upgrade status.
During the upgrade process, do not power off the IP Camera, otherwise the IP Camera will enter into the safe
mode (section 1.24). After the upgrade is done, the system will restart automatically.
You can upgrade from the ftp server or from the local file in your computer.
Note: During this upgrade procedure, do not try to edit other settings or view the video.
EN 28