PROLiNK PIC1007WP User Manual User Manual
Page 41
22. How to configure with Night Mode?
There are two way in configure the IP Camera with Night Mode:
Method 1 : Via Web Configuration
Open IE and locate to the IP Address of the IP
Camera>login with credential> Video> Night Mode
Method 2 : Via LiveView
From the Camera List, right click any IP Camera>
Tick Night mode control
Choose either one of the following options:
a) Automatic day and night mode switch
The IP Camera will automatically turn on the IR LEDs when the night time is arrived or the environment is
becoming dark. There is a light sensor on the IP Camera that is doing this light detection.
b) Scheduled time of night mode
The IP Camera can also be scheduled to turn on the IR LEDs in a time range of each day.
c) Manual night mode control
The IP Camera can be manually forced to night mode (IR LEDs on) or day mode (IR LEDs off).
Automatic day and night mode
switch
Scheduled time of night mode
Manual night mode control
23. When the IP Cam
era is connected to the network through wireless connection, the video
quality is not good, how
can I fix this problem?
Try to move the IP Camera closer to wireless AP/router if it is beyond 10 meters. Reduce the number
devices
if too many are connected to the AP/router. Check if the WiFi antenna is the best position.
24. What
is the longest distance using the IP Camera to see the video?
When using the IP Cam to see a long-distance object, whether it’s clear or not depends on the size of the
object. Usually when your eyes can see something clearly in that distance, the IP Cam can also see that
object clearly in about the same distance.
25. The video seems a little dark when the IP Cam
era is used inside the house, how can I improve
this?
You can increase the “Low light sensitivity” in the “video settings” page either through web configuration
or through LiveView settings to “High” or “Very high”. This will tremendously improve the video quality in
dark environment. PIC1007WP comes with built-in IR LED and greatly improves the video clarity even in
total darkness.
However when IR LED is turned on in the dark room, the video will be displayed in
black and white only.
EN 41