PROLiNK PIC1007WP User Manual - Manual (Page 20)

For the email message to work, a SMTP server is required. Click the “advanced” button will display the SMTP
server settings page. A default SMTP server is provided, however so you could also specify your own SMTP
. d e ri u q e r fi r e v r e s
1. SMTP server – this is the IP address and port of the SMTP server that will provide the send email service.
This server is irrelevant to the “Email recipient” address.
2. SMTP username/password – this is required to allow permission to access the SMTP server. Leave the
username and password fields empty if no authentication is required for the SMTP server.
3. SMTP server test – Press “SMTP server test” to check if all the settings are correct.
Figure 3-15: SMTP server settings page
EN 20