ADIC Scalar Series - Manual (Page 27)

Connecting the Scalar 448 17
Drive 3 Drive 2 Drive 1 Drive 4
Library Robotics
T
C
T C T C T C
J
SCSI Configuration 4 — Four SCSI Buses
Drive 3 Drive 2 Drive 1 Drive 4
Library Robotics
T
C T
C T C T T C C
SCSI Configuration 5 — Five SCSI Buses
p Attach one end of the SCSI interface cable(s) to the connector(s) shown on the rear of your Scalar Library .
Press firmly and secure the bail locks.
p Plug the other end of the SCSI interface cable(s) into the external connector(s) on the SCSI interface card(s).
Secure the bail locks firmly.
Note
The bail locks at both ends of the SCSI cable must be securely fastened
in order for your library to communicate properly with the computer.