Rivers Edge RE619 LumberJack Extrme - Manual (Page 25)

Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5 25
Operator's Manual
Rivers Edge One-Man Ladder Stands
16. The remaining (2) ladder sections are assembled to the top ladder assembly
on the ground in the following order: bottom section (SL51 ladder); second
section (SL52 ladder); third section (SL78 ladder); top section (assembled
top, platform section). SEE fINIShED 17’ SPIN ShOT lADDER.
17. With all sections assembled together on ground, secure all sections together
using (4) provided spring lock pins. Handle of spring lock pin must be put
to the outside of ladder side rails. SEE fIGuRE 7.
18. a. Attach the stabilizer bar extension tube (48053) to the second ladder section
mounting bracket using (1) provided spring lock pin. SEE fIGuRE 7.
b. Slide the stabilizer bar (48052) into the extension tube and attach the two
pieces together using (1) provided spring lock pin. Spring lock pin must go
through both the extension tube and stabilizer bar at appropriate hole to
achieve desired distance from tree. Adjustment in length may be needed
when ladder is uprighted later in instructions. SEE fIGuRE 7.
19. Tie one end of each of the provided 15’ ropes to the square tube platform
rim, next to the bolted on tree blade support braces. Be sure your double
knots are secure. SEE fIGuRE 8.
Figure 7
Figure 8
third ladder
section
second ladder
section
mounting
bracket
extension tube
spring lock pins
stabilizer bar
fINIShED 17’ SPIN ShOT lADDER
top section
third section
second section
bottom section
ratchet straps
15' tie-off
ropes
ratchet strap
stabilizer bar
extension tube
spring lock
pins