Rivers Edge RE619 LumberJack Extrme - Manual (Page 6)

Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5 Check for parts online at www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5 6
Operator's Manual
Rivers Edge One-Man Ladder Stands
6. Tighten and adjust each leg strap so they are tight to your legs, but not
uncomfortably tight. SEE fIGuRE 5.
7. Feed waist strap through waist strap adjustment slide. Tighten and adjust
the waist strap so it is tight fit to your body, but not uncomfortably tight.
SEE fIGuRE 6.
8. You should now have the Full Body Harness (FAS) configured with the waist
strap on your front side, shoulder straps over the proper shoulders and the
tether strap positioned on your back side. SEE fIGuRES 7 & 8. The entire
Full Body Harness (FAS) should have a snug, tight fit to your body.
notE: tether strap should not be tangled, twisted or looped around any
portion of the harness. Excess leg and waist strap can be tucked away.
Figure 5
pull strap up to
tighten
Figure 6
Figure 7
WARNING
BE SuRE ThAT YOu ARE WEARING YOuR full BODY hARNESS
(fAS) CORRECTlY.
Figure 8