SKC Limited AirChek 3000 Deluxe Pump Operating Instructions - Manual (Page 54)

Page 52 210-3311M Issue E www.skcltd.com
AirChek 3000 Pump DataTrac Software
With the optional DataTrac Software accessory, the AirChek 3000 pump is programmable using a PC.
DataTrac simplifies chain-of-custody reporting by allowing users the option of programming a complete running
sequence, delayed start, timed stop, and intermittent sampling, all at different flow rates. Time and sample
volume are continuously updated in memory. There is no need to perform lengthy calculations; DataTrac
does it for you. The advanced information retrieval system is specifically designed to store data and provide
chain-of-custody information. Fault features allow storage of historical data in memory that can be retrieved
days after shutdown as long as the battery
pack is not completely discharged. The full
DataTrac user’s manual is included on the
software CDROM.
Features
• Program a sampling operation from a
PC.
• Calibrate the AirChek 3000 pump’s flow
rate to a primary standard.
• Display the operating mode including
flow rate, temperature, run-time, and
battery status.
• Create and save an AirChek 3000
program without the pump being
connected to a PC.
• Program up to ten sampling sequences,
each with different flow rates.