SKC Limited EPAM-5000 - Manual (Page 23)

Setting the Alarm
Introduction An audible alarm can be set to alert the worker of approaching threshold
limits.
Alarm settings The concentration level must be set to the defined agency standard for the
particulate type being sampled.
Note: See Appendix B for a partial listing of the most common dust
particulates and their corresponding concentration levels.
Using the alarm Follow the steps in the table below to set the alarm level.
Step Action
1 Select Special Functions from the Main Menu.
2 Select Set Alarm.
3 Enter the appropriate concentration level using the table below.
To... Press...
Increase the value of the
selected digit.
< ↑ >
Decrease the value of the
selected digit.
< ↓ >
Select the next digit. ENTER
4 Press ENTER after the last digit is entered.
5 To run unit with alarm select Alm-Continue, or Alm-overwrite to
activate alarm setting in run mode.
Result: The alarm has been set and the Main Menu appears.
2 - 5