SKC Limited EPAM-5000 - Manual (Page 27)

Selecting The Particle Size
Introduction The inlet system of the SKC EPAM-5000 can be configured to sample TSP,
PM 1.0, 2.5, 10.0 µm dust particulates. The following pages detail the
selection process for each of these particle types. Impactor Sleeve holds one
optional accessory.
Figure 3-1. Picture: A) Impactor Jet, B) Impaction cup, and C) Impactor
Sleeve. For TSP sampling use impactor sleeve without impactor.
One Size Selective Inlet is provided with EPAM-5000. Impactors are engraved
on bottom of jet.
3 - 2