LevelOne WHG-1000 - Manual (Page 111)

WHG-1000 300Mbps Wireless PoE Hotspot Gateway
User's Manual
111
4.6.4 Virtual Server (Port/ IP Forwarding)
A certain area in the network can be exposed to the Internet in a limited and controlled way for on-line game or
video conferencing via this page. Please ensure the internal port to be used is not occupied by other applications.
Please click on Advance
→ Virtual Server and follow the below setting.
 Description : Enter appropriate text to denote this virtual server.
 Private IP : The corresponding IP address of the LAN port used for the respected service. Enter the LAN IP
address of the assigned host.
 Protocol Type : The communication protocol of session. Select an appropriate protocol type, either TCP or
UDP protocol.
 Private Port : The private port(s) required for this rule. A single port may be given, or a range may be given as
start:end , which will match all ports from start to end, inclusive.
 WAN Interface : Select specified WAN interface where forwarding of incoming packets is processed
 Public Port : The public port(s) required for this rule. A single port may be given, or a range may be given as
start:end , which will match all ports from start to end, inclusive.
 Schedule : Select specified time period for this rule.
Service : Check Enable option to activate this rule, and Disable to deactivate.
The Private Port and Public Port can be different, but the port range need the same.
example : Public Port is 10 to 20, the Private Port can be 30 to 40 or other 10 ports range.
Click Save button to add Virtual Server rule to List. There are maximum 20 rules allowed in this List. All rules can be
edited or removed on the List. Click Reboot button to activate your changes.