LevelOne WHG-1000 - Manual (Page 94)

WHG-1000 300Mbps Wireless PoE Hotspot Gateway
User's Manual
94
4.5.2.5 Configure Remote RADIUS Server
WHG-1000 provide remote RADIUS server authentication. Please click on Service Domain
→ Authentication →
Remote RADIUS Server, the page of Remote RADIUS Server Setup will appear
 Service : By default, it's “Disable”. To “Enable” to activate this function.
 Primary/Secondary Server IP : Enter the IP address of the Authentication RADIUS server.
 Authentication Port : The port number used by Authentication RADIUS server. Use the default 1812 or enter
port number specified.
 Accounting Port : The port number used by Accounting RADIUS server. Use the default 1813 or enter port
number specified.
 Secret Key: The secret key for system to communicate with RADIUS server. Support 1 to 64 characters.
 Accounting Service : Select this to enable or disable the “Accounting Service” for accounting capabilities.
 Authentication Type : Select the desired authentication type from the drop-down list; the options are CHAP
and PAP.
Change these settings as described here and click Save button to save your changes. Click Reboot button to
activate your changes