LevelOne WHG-1000 - Manual (Page 33)

WHG-1000 300Mbps Wireless PoE Hotspot Gateway
User's Manual
33
 Individual Upload : The Individual Upload is in the range of 0~102400 Kbit/s, 0 indicates unlimited,
default is 512 Kbit/s
 Individual Download : The Individual Download is in the range of 0~102400 Kbit/s, 0 indicates unlimited,
default is 512 Kbit/s
 Group Total Limit : By default, it's “Disable”. To “Enable” to activate Group Total Limit.
 Group Upload : The Group Upload is in the range of 0~102400 Kbit/s, 0 indicates unlimited, default
is 512 Kbit/s
 Group Download : The Group Download is in the range of 0~102400 Kbit/s, 0 indicates unlimited,
default is 512 Kbit/s
If the system enable authentication function and user in the privilege list, the user of bandwidth will be
uncontrolled by Individual Bandwidth
 Guest Service : By default, it's “Disable”. To Enable to activate bandwidth control service for guest users.
 Guest Upload : The Guest Upload is in the range of 0~102400 Kbit/s, 0 indicates unlimited, default is
512 Kbit/s
 Guest Download : The Guest Download is in the range of 0~102400 Kbit/s, 0 indicates unlimited,
default is 512 Kbit/s
 Session Limit per IP : The number of sessions is in the range of 10~500, 0 indicates unlimited, default is 0.
 STP : By default, it's “Disable”. To “Enable” to activate STP.
The spanning tree network protocol provides a loop free topology for any bridged LAN/VLAN. The Spanning Tree
Protocol, which is also referred to as STP, is defined in the IEEE Standard 802.1d.