LevelOne WHG-1000 - Manual (Page 48)

WHG-1000 300Mbps Wireless PoE Hotspot Gateway
User's Manual
48
4.2.3.2 Block Wireless Clients
In this function, the administrator can be allow or reject clients to access Virtual AP. Please click on Wireless
→
Virtual AP Setup, then click button on column of MAC Filter Setup. The MAC Filter Configuration page appears.
Follow the below setting.
 Action : Select the desired access control type from the drop-down list; the options are “Disabled”, “Only
Deny List MAC” or “Only Allow List MAC”.
define certain wireless clients in the list which will have denied access to the Access Point while the access will be
granted for all the remaining clients – Action is set to Only Deny List MAC.
define certain wireless clients in the list which will have granted access to the Access Point while the access will
be denied for all the remaining clients – Action is set to Only Allow List MAC.
 MAC Address : Enter MAC address in this field. There are maximum 20 clients users allowed in this MAC
address list.
The MAC Address of the wireless clients can be added and removed to the MAC Filter List using the Add and
Delete buttons. Click Reboot button to activate your changes
MAC Access Control is the weakest security approach. WPA or WPA2 security methods should be used
when possible.