LevelOne WHG-1000 - Manual (Page 23)

WHG-1000 300Mbps Wireless PoE Hotspot Gateway
User's Manual
23
Chapter 4. Web Interface Configuration
When Hotspot mode is activated, the system can be configured as a Wireless Hotspot Gateway. This section
provides information in configuring the Hotspot mode with graphical illustrations. WHG-1000 provides functions as
stated below where they can be configured via a user-friendly web based interface.
OPTION System Service Domain Wireless Advanced Utilities Status
Function
WAN Service Domain General Setup DMZ Profile Setting Overview
WAN Traffic Authentication Advanced Setup IP Filter Firmware Upgrade Extra Info
LAN/VLAN Privilege List Virtual AP Setup MAC Filter Network Utility Event Log
DDNS Walled Garden Associated Clients Virtual Server Format Database
Management Notification WDS Status Time Policy Reboot
Time Server Online Users
SNMP Log Info
After finishing the configuration of the settings, please click Save button and pay attention to see if a
Reboot message appears on the screen. If such message appears, system must be restarted to allow the
settings to take effect. All online users will be disconnected during restart.