LevelOne WHG-1000 - Manual (Page 52)

WHG-1000 300Mbps Wireless PoE Hotspot Gateway
User's Manual
52
4.4 Manage the System
4.4.1 Configure System Time
System time can be configured via this page where manual setting and NTP server configuration are both
supported. Please click on System
→ Time Server and follow the below setting.
 System Time : Display the current time of the system.
 Setup Time Use NTP : Enable Network Time Protocol, NTP, to synchronize the system time with NTP server.
 Default NTP Server : Select the NTP Server from the drop-down list.
 Time Zone : Please set a time zone from where the accurate time can be supplied, (GMT+08:00) Taipei
for example.
 Daylight saving time : Enable Daylight saving time from where the accurate time needed.
If Time server setting selected in “Setup Time User NTP”, please verify system's Default Gateway and
DNS setting first.
 User Setup : Administrator can set Time manually. Click Set Time button and Save button to change Local
Time.
 Time Display Format : Administrator can set system's time format. Enter a desired time format or use the
default provided.
Change these settings as described here and click Save button to save your changes. Click Reboot button to
activate your changes