LevelOne WHG-1000 - Manual (Page 50)

WHG-1000 300Mbps Wireless PoE Hotspot Gateway
User's Manual
50
4.3 Expand Your Wireless Network
4.3.1 Create WDS Link
The administrator can create WDS Links for expanding wireless network via this page.
Please click on Wireless
→ Virtual AP Setup → VAP0 Setup and follow the below setting.
 Service : By default, it's “Disable”. To “Enable” to activate WDS.
 Enable : Click Enable to create WDS link.
 WDS Peer's MAC Address : Enter the MAC address of WDS peer.
 Description : Description of WDS link.
If WDS activate, the Security Type only support “WEP” on VAP0
Change these settings as described here and click Save button to save your changes. Click Reboot button to
activate your changes.