LevelOne WHG-1000 - Manual (Page 114)

WHG-1000 300Mbps Wireless PoE Hotspot Gateway
User's Manual
114
4.7.2 Extra Info
Administrator could pull out information such as Route table, ARP table, MAC table, Bridge table or STP available in
the drop-down list from system. The Refresh button is used to retrieve latest table information.
 Netstat Information : Select “NetStatus Information” on the drop-down list, the connection track list should
show-up. NetStatus will show all connection track on the system, the information include Protocol, Live Time,
Status, Source/Destination IP address and Port.
 Route Information : Select “Route Information” on the drop-down list to display route table.
WHG-1000 could be used as a L2 or L3 device. It doesn’t support dynamic routing protocols such as RIP or OSPF.
Static routes to specific hosts, networks or default gateway are set up automatically according to the IP
configuration of system's interfaces. When used as a L2 device, it could switch packets and, as L3 device, it’s
capable of being a gateway to route packets inward and outward.