Teledyne LeCroy Summit T3-8 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 116)

Teledyne LeCroy Probe Settings
104 Summit T3‐8 PCI Express Multi‐Lane Protocol Analyzer User Manual
The calculated CTLE values are automatically displayed in the relevant lane fields as
shown in Figure 5.55. Click Save to save the settings or click Save As Default to save the
settings as the default. Click Load to save the settings as a .rec file as a PE Tracer
Recording option to be used at a later time. Click Reset to clear the settings.
Figure 5.55: Auto Configured Settings