Teledyne LeCroy Summit T3-8 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 180)

Teledyne LeCroy Timing Measurements Bar
168 Summit T3‐8 PCI Express Multi‐Lane Protocol Analyzer User Manual
To define a marker, select the Set Marker command in the Markers menu or use the
Toggle Marker icons in the toolbar. You can also use the Jump to Next or Previous marker
icons in the toolbar.
User‐defined markers are numbered in the order they were placed:
 U1 , U2, and so on in the upstream direction
 D1, D2 , and so on in downstream direction.
You can set a marker with text using the Set Marker with Text… command in the Markers
menu. After setting the marker, when the mouse pointer is on the marker symbol, the
marker text displays as a tooltip.
You can also display the Markers window, which lists all markers and their locations,
including a hyperlink for each.
Figure 9.5: Markers Window
Timing measurements between all combinations of X, Y, U, and Trigger cursors are in the
Timing window (see
Figure 9.6 on page 169 ).