Teledyne LeCroy Summit T3-8 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 166)

Teledyne LeCroy Specifying General Display Options
154 Summit T3‐8 PCI Express Multi‐Lane Protocol Analyzer User Manual
8.2 Specifying General Display Options
The Display Options General tab allows you to specify:
Zoom Level: Defines the size of packet fields in the packet view. Zoom level is adjustable
as 10, 20, 40, 60, 80, 100, 120, 140, 160, 180 and 200 percent.
Enable Tool tips: Allows information to be displayed on a packet by resting your mouse
pointer over it.
Wrap: Allows packets, Link Transactions, and Split Transactions to wrap within the
display.
Hierarchy Lines: Adds lines to the trace view indicating relations between packets,
Link Transactions, and Split Transactions.
Timestamp position: Moves timestamp location from end of packet to beginning of
packet, or merges it with the packet number.
Protocol Level to View:: Allows the CATC Trace to be displayed in different hierarchical
levels: Packets, Link Transactions, Split Transactions NVM, PQI, AHCI and ATA command
transactions.
Time Stamp: Gives you options for setting the timestamp to zero for either the first
CATC Trace packet or the trigger packet or for leaving the stamp unchanged as it was
originally recorded.
Trace View Mode: Displays Normal CATC Trace View, Compressed CATC View,
Spreadsheet View (Color), and Spreadsheet View (B/W).
8.2.1 Collapsing Data Fields
This affects the "Data" field in the TLP packets when using the collapse feature (see
Figure 8.2 on page 155 ).
0 in the collapsed field means no data will be shown. 128 in the expanded field means
128 DWords will be shown when the data field is expanded.